• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Cockrell School of Engineering
UT Shield
Center for Mechanics of Solids, Structures and Materials
  • Home
  • Faculty
  • Research
  • Facilities
  • Seminars
  • Events
  • News
  • Contact
You are here: Home / Seminars / Archived Seminars / 2017-18 Seminars / Fluid-Induced Large Deformation at Soft Material Interfaces with Blisters and Craters

Seminar Schedule – Spring 2018


Thursday, April 26, 2018
Time: 3:30pm – 5:00pm
Place: WRW 102

Fluid-Induced Large Deformation at Soft Material Interfaces with Blisters and Craters

Shutao Qiao, University of Texas at Austin

This dissertation focuses on fluid-induced large deformation at the interfaces where at least one side is soft material, i.e. materials with low Young�s modulus and capable of large deformation. Soft materials are finding important applications in many emerging fields such as soft electronics, soft robotics, and bio-integrated devices. Most often, soft materials have to form interfaces with other materials where fluids may present. Such interfacial fluids may affect attachment in negative or positive ways but so far, theoretical studies are rare due to the difficulties associated with large deformation and elasto-capillary effects. Regarding the dynamics of fluid flow as a sequence of static equilibrium states, it becomes sufficient to analyze problems in the context of solid mechanics. This dissertation provides nonlinear solutions to such class of problems through two examples � interfacial blisters and craters. When a soft membrane covers a flat surface, interfacial blisters inflated by increasing amount of interfacial fluid may cause detachment between the membrane and the substrate. I formulated a nonlinear membrane theory to characterize the bulging and bulging-induced delamination process of the soft membrane. Elasto-capillary effects are considered due to their significance at small-scale. Solutions for both rigid and soft substrates are obtained. For rigid substrates, a variety of boundary conditions is modeled. In the second example, the crater problem is inspired by emerging experimental evidence that enhanced adhesion has been measured when a soft material with surface craters is pressed against a rigid surface. I established a nonlinear elasticity framework to model suction forces generated by the loading and unloading process. Both ideal gas and incompressible fluid have been considered. This framework has been validated by experiments and has been applied to optimize the design of craters. The nonlinear theoretical frameworks established in this dissertation offer methodologies to model and understand other soft material interfaces with interfacial fluid.

For further information, please contact Dr. Nanshu Lu at nanshulu@mail.utexas.edu or (512) 471-5963.

Footer

About Us

Privacy Policy
UT Directory

News

  • Fall 2022August 26, 2022
  • Kenneth M. Liechti featured in an Applied Mechanics Reviews PodcastJanuary 23, 2019

Contact Us

Aerospace Engineering Building – ASE 5.212 (map)
2617 Wichita Street
1 University Station, C0600
Austin, Texas 78712-0235

Phone: 512-471-5963
Fax: 512-471-5500

  • Facebook
  • Instagram
  • LinkedIn
  • Twitter
  • YouTube

UT Home | Emergency Information | Site Policies | Web Accessibility | Web Privacy | Adobe Reader

© The University of Texas at Austin 2026